Products ccc

Default Category

Differential Pressure Transmitter

Click on above image to view full picture

Differential Pressure Transmitter

Differential Pressure Transmitter
Model No: LTD

Designed to measure the wet to wet differential pressures of liquids and gases

Compact, efficient design available in Low or High psi ranges that facilitates installation in tight spaces

Low Range housing is constructed of stainless steel and aluminum

High Range housing is made from a 316-grade stainless steel ideally suited for an industrial environment

Fast response sensor and signal conditioned electronic circuitry provide quick and accurate readings

Unique isolation system responds to pressure changes approximately 20 times faster than conventional transmitters with ranges below 100 psi (Low Range Model)

CE approval is standard on all models

NEMA 4 approval is standard on the Low Range model

Electrical Output: 4......20mA, 2 wire 0.....5VDC or 0....10 VDC

Electrical Connection: Barrier trip terminal block with conduit enclosure and 0.875 DIA conduit opening DIN 43650 with mate

Excitation Voltage: 9......30 VDC

Wetted Parts/Connection: 17-4PH stainless steel with Viton® O-ring, 1/4” - 18 NPT female

Housing: 304 SS

Proof Pressure:Refer to pressure range chart 3X full scale (max. 10,000 psi)

Burst Pressure: Refer to pressure range 5X full scale (max. 10,000 psi)

Normal Operating Temperature Range 0°F to 175°F (-17°C to 82°C)

Compensated Temperature Range 30°F to 150°F (0°C to 65°C)

Ambient Temperature Effect on Zero/Span ±2% of full scale/100°F (37.7°C)

Response Time 30-50 ms

Long Term Stability ±0.5% full scale per annum

Weight 14.4 oz. (408g)

Accuracy: ±0.25% FSO

Enclosure Rating: IP65

To measure drops across filters

Pumps and compressors, flow measurements of gases and liquids, liquid level measurement of pressurized vessels